Powered by GitBook

1 of 1

Loading...

Cube Model

Cube Model

The Cube model is a 3D model that is used to model objects like Pixel/Peace Stakes, Boxes, or Grids. While the model is 3D, xLights renders the effects in 2D.

Options/Settings

Description

Stand Style

Layers All Start in Same Place

All the wiring for each layer will start in the same location. Bottom Left in the example above.

Example Configurations

3W x 3H x 3D, Front Bottom Left, Horizontal Left/Right, ZigZag

3W x 3H x 3D, Front Bottom Left, Vertical Left/Right, ZigZag

3W x 3H x 3D, Front Bottom Left, Horizontal Front/Back, ZigZag

3W x 3H x 3D, Front Bottom Left, Stacked Left/Right, ZigZag

Strings

Number of Physical Strings of Pixels or Lights

Starting Location

Determines the starting of the pixel string wiring.

Direction

Direction of the wiring and how it "snakes" though the nodes. Horizontal proceeds left and right based on the front perspective. Vertical will go up and down. Stacked will wire each layer then move to the next layer. See below for examples

Stand Style

Zig Zag - Wiring winds back and forth.

No Zig Zag - Wiring follows the direction and starts back at the beginning of the next line.

Alternate Pixel - Wiring 'jumps' over every other node to and winds back thought populating the 'jumped' nodes.

Layers All Start in Same Place

All the wiring for each layer will start in the same location.

Width

Width of Cube

Height

Height of Cube

Depth

Depth of Cube